The most trusted heat transfer vinyl brand in the world. Siser EasySubli Mask is required to use Siser EasySubli HTV The latest innovation in garment sublimation is here! EasySubli is a brand-new HTV by Siser that allows you to print custom, full-color designs using your sublimation printer. EasySubli can be fed directly through a sublimation printer, which eliminates the need for transfer papers. After printing, it is recommended that you allow the inks to dry for 2 hours before masking, or you can lay your design underneath an open heat press platen for about 45 seconds. While traditional sublimation is limited to white polyester garments, EasySubli can be used with a variety of different fabrics and colors. EasySubli is also applied at a low temperature of 311F, compared to 380F and above for traditional sublimation. EasySubli is designed to work with virtually any sublimation printer, however, we recommend Sawgrass machines and the specially formulated Siser EasySubli Inks by Sawgrass for best results. Thermotransfer film with plain polyester backing, designed for sublimation ink printers. It grants vibrant colours and a stunning thin design on the garment and allows to decorate cotton fabrics with sublimation inks. Suitable textiles: cotton (all colors) and white/light coloured polyester or poly/cotton blend, not treated. Craft Cutter Settings (Chart)SiserRomeo&Juliet Blade: Romeo & Juliet 45 Gram Force: 15-20 Offset: 0.250 Speed: 10 Brother Scan N Cut DX Blade: Autoblade Cut Speed: 5 Half Cut: Auto Cricut Explore Air Blade: Standard Setting: Iron On Cricut Maker Blade: Fine-Point Blade Setting: Heat Transfer (Non-Cricut) Silhouette4 Blade: AutoBlade, 3 Material: Heat Transfer Smooth Force: 15 Speed: 8 Roland GS/GX-24 Blade: 45 Gram Force: 80-90 Offset: .250 Speed: 30-50 cm/s Graphtec Blade: 45 Gram Force: 8-9 Tool: CB09U+0 Speed: 30 cm/s Application SpecificationsBefore masking, place the printed design on the lower platen of the heat press for 45 seconds to allow the radiating heat from the upper platen to set the ink. Alternatively, you can set the design aside and allow it to air-dry for 2 hours before masking. Applies to 100% Polyester, 100% Cotton, Poly/Cotton blends, and most other fabrics. Can be applied to any color garment not limited to just white polyester. Applies at a lower temperature of 311F for 15 seconds with a heat press Thickness: 220 microns Applies to: 100% Cotton, 100% Polyester, Poly/Cotton blends Temperature: 311F/155C Time: 15 seconds Pressure: Medium Peel: Warm Application InstructionsHeating Press Instructions Print, cut, and weed material Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 310F/155C (EasyPress users add approx. 30) Use medium pressure for 15 seconds Peel EasySubli mask hot Laundering Instructions Wait 24 hours before first wash Machine wash cold with mild detergent Dry on normal dryer setting Do not dry clean Liquid fabric softener not recommended EasySubli Applies To Cotton Polyester Cotton / poly blends